EEVblog Electronics Community Forum
Electronics => PCB/EDA/CAD => Proteus => Topic started by: lk on December 26, 2017, 06:01:36 pm
-
Greetings,
Im building a Z80 SBC based off Grant Searle's design
http://searle.hostei.com/grant/z80/SimpleZ80_32K.html (http://searle.hostei.com/grant/z80/SimpleZ80_32K.html)
I have previously build his 6502 design, however with this one i have run into a ERC error that tells me that i have a short between the +5v rail and ground, and now i have been, looking at this for hours and cant seem to find what is wrong :)
Its most likely something simple.
The design is included. Proteus 8.7.
-lasse
Posted in the labcenter forum as well, but they are on vacation this week, so i will try here :)
-
The guys at labcenter to my rescue,
turns out that i had a hidden wire under U3, dont know how it got there, but removing it solved the problem.
-lasse