Author Topic: Ancient BenchMarq "Fuel Gauge" Chip BQ2913  (Read 359 times)

0 Members and 1 Guest are viewing this topic.

Offline tomoliva

  • Newbie
  • Posts: 2
  • Country: gb
Ancient BenchMarq "Fuel Gauge" Chip BQ2913
« on: May 10, 2021, 11:01:27 am »
Been knocking myself out scouring the usual places for a data sheet - guessing it's a product that TI killed off when they took over...

Item I'm peering at is in a Giant LaFree ebike NiMH 20 cell Panasonic battery pack - the battery is working OK but range anxious user wants a working fuel gauge ...

Anybody have a spec sheet / done a 20S NiMH monitor?

 

Offline Renate

  • Super Contributor
  • ***
  • Posts: 1259
  • Country: us
Re: Ancient BenchMarq "Fuel Gauge" Chip BQ2913
« Reply #1 on: May 10, 2021, 01:38:38 pm »
Dunno.
I just ordered some BQ76920-03 (3-5 cell) for a future 4 x LiFePO4 setup.
The BQ76940 goes to 15 cells.
https://www.ti.com/lit/gpn/bq76920 (includes 40)
 

Offline tomoliva

  • Newbie
  • Posts: 2
  • Country: gb
Re: Ancient BenchMarq "Fuel Gauge" Chip BQ2913
« Reply #2 on: May 10, 2021, 04:59:37 pm »
I'm guessing that it might be in a Benchmarq Data Book - Benchmarq went through the hoops - bought by Unitrode in 1998 iirc - which itself got swallowed by TI about a year later ...

There are hints that a data book was published around '98 but I guess there was a bunch of pruning (and maybe part renumbering) happened.... Found an older databook on archive.org....   and this - just to torment the hunter> https://www.wirelessdesignonline.com/doc/1998-data-book-0001

Ho-hum...off to search "gas gauge ICs" ( or maybe an Arduino nano and a few LEDs will wake up fast enough when powered up... - give him a pot to twiddle to adjust the scale to personal taste.... )

« Last Edit: May 10, 2021, 05:01:15 pm by tomoliva »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf