Electronics > Power/Renewable Energy/EV's

estimate the running time for 3 led in parallel

(1/1)

khiworld:
Hello.

This is what I did....
                                       I got one 3.7v/ 1000mAh Li ion battery
                                       V_battery flows to LED driver.......I set the resistor value for my target led current.  V_fb is fixed to be 0.1V
                                       3 LED in parallel.
                                       Case 1.
                                                    R is set to be 0.43. so, I_led = V_fb / R =  0.1v / 0.43 = 235mA
                                       Case 2.
                                                    R is set to be 0.51.      I_ led = 0.1v/ 0.51 = 196mA
                           
                                                      Simple calculation                                                                                   Measurement 
                                        Case 1.                                                                                           
                                                     1000mAh / (3*235mA) = 1.42 hour = 85min                                               150 min
                                        Case 2.
                                                      1000mAh / (3*196mA) = 1.7 hour  = 102min                                              174 min 
                                       

 Please correct me if I did wrong.

  Thanks

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod