Author Topic: H V power for PM  (Read 1651 times)

0 Members and 1 Guest are viewing this topic.

Offline SalmaTopic starter

  • Newbie
  • Posts: 1
  • Country: tn
H V power for PM
« on: May 24, 2024, 02:04:50 pm »
Hello,
I am trying to revive an analog HV power, 0.1 kV to 3.0 kV , 30 mA, manufacture: SIEMEL, that is normally used for a photo multiplier.
The problem is that the the fixed power  (on the potentiometer) is not the same given by the needle.
For a fixer 0.1 kEV I measure a power higher than 1 kV  y my voltmeter !
I have not yet found a data sheet about it and  no idea how to start !
Thanks,


 

Offline jonpaul

  • Super Contributor
  • ***
  • Posts: 3492
  • Country: fr
Re: H V power for PM
« Reply #1 on: May 25, 2024, 01:09:49 pm »
What meter used to measure?

Is it capable of 4,000V?

 Never heard of that mark (brand) or model.

Get the manual and schematic

j

Jean-Paul  the Internet Dinosaur
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf