Picked up a non-working high end 32" Acer gaming monitor. Was hoping it was just a bad cap on the power board but not so lucky this time. Anyway, I think I found the problem. This SMD FET, and I know at least it is a FET cuz the pins are marked G, D, and S. This FET sends greater than 1.8V to turn on a pair of LED controller IC's, no voltage present. This FET is on the main board. Power board, I believe is good, puts out 19v which gets converted to 12v out to the main board and 28v for the leds. Looked all over the interweb for this daggum FET but can not find it. 15F46 is how its marked.
