Electronics > Repair
Agilent 34401A Serial port pints 3 (TX) 5(GND) stuck at 9V on sys (SOLVED)
<< < (4/4)
The_Spectrum.A_idiot:
The DUT was on the table for a day before on the alligator clips I just plugged the wires after dealing with the logging issue :D

So in essence both of your recommendations unknowingly were performed :D
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod