| Electronics > Repair |
| Agilent 53132A Counter Repair (FIXED and Upgraded) |
| << < (15/29) > >> |
| edpalmer42:
How mangled is the connector? If you're careful, it's surprising how easy it is to restore a bent BNC. Ed |
| TheSteve:
This one is an even closer match - http://www.digikey.ca/product-detail/en/te-connectivity-amp-connectors/5227677-1/A32268-ND/811166 |
| HighVoltage:
--- Quote from: TheSteve on August 27, 2016, 03:24:09 am ---This one is an even closer match - http://www.digikey.ca/product-detail/en/te-connectivity-amp-connectors/5227677-1/A32268-ND/811166 --- End quote --- That one looks like it should fit well. I ordered an original from Keysight a while back but that one was much more expensive |
| Dwaine:
Thanks everyone. I ordered the connector from digikey. |
| Dwaine:
The Digikey part number listed here is the exact fit. Replaced the BNC connected and channel 2 calibrated/passed. Working great. Thanks everyone for the assistance. I appreciate it. |
| Navigation |
| Message Index |
| Next page |
| Previous page |