Author Topic: Agilent 54831m/b bracket identification  (Read 126 times)

0 Members and 1 Guest are viewing this topic.

Offline CyclotronTopic starter

  • Regular Contributor
  • *
  • Posts: 84
  • Country: us
Agilent 54831m/b bracket identification
« on: January 17, 2025, 02:26:24 am »
I picked up an Agilent 54831m at a decent price.  It is very clean and in great shape. The issues I've found so far are that the scope board in the bottom had just about every screw loose and 2 were out and rolling around. I put all of those back and tightened them to factory spec but there was an aluminum bracket loose in bottom that I can't figure out where it went.

I've attached some pics in case someone can tell me where it goes.

Thanks!
 

Offline CyclotronTopic starter

  • Regular Contributor
  • *
  • Posts: 84
  • Country: us
Re: Agilent 54831m/b bracket identification
« Reply #1 on: January 17, 2025, 03:43:50 pm »
Jeez, I don't know how many times I scrolled through the manuals looking for where this bracket went and didn't see it.
For anyone that comes along looking. The attached image is where it should be installed.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf