| Electronics > Repair |
| Aixun Soldering Station |
| << < (3/3) |
| CapLeaker:
There is a similar problem on an Aixun T3A doing this on Badcaps. Read that: https://www.badcaps.net/forum/showthread.php?t=123458 |
| RayRay:
--- Quote from: dehydrated lemur on October 27, 2023, 01:03:26 pm ---I have opened up this handle and reflown all the joints inside. https://imgur.io/a/jbprFzV is this what you are referring too? --- End quote --- No, I was referring to the connector on the station itself, reflow that (clearly, you're gonna have to open it up first( |
| Sorama:
Hi I bought a T3B with a T210 handle a few years ago but never used it because I keep getting the message “tip not connected” (or something similar). But now I do want to use it so I need to fix this thing. When I pull slightly at the cable just behind the handle, it reconnects so there must be some bad contact in the handle itself. Does someone has a reference on how to open the handle ? Tnx. |
| Navigation |
| Message Index |
| Previous page |