Electronics > Repair

Aixun Soldering Station

<< < (3/3)

CapLeaker:
There is a similar problem on an Aixun T3A doing this on Badcaps. Read that:
https://www.badcaps.net/forum/showthread.php?t=123458

RayRay:

--- Quote from: dehydrated lemur on October 27, 2023, 01:03:26 pm ---I have opened up this handle and reflown all the joints inside.

https://imgur.io/a/jbprFzV

is this what you are referring too?

--- End quote ---
No, I was referring to the connector on the station itself, reflow that (clearly, you're gonna have to open it up first(

Sorama:
Hi

I bought a T3B with a T210 handle a few years ago but never used it because I keep getting the message “tip not connected” (or something similar).

But now I do want to use it so I need to fix this thing.
When I pull slightly at the cable just behind the handle, it reconnects so there must be some bad contact in the handle itself.

Does someone has a reference on how to open the handle ?

Tnx.

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod