| Electronics > Repair |
| Aixun T3A damaged IC |
| (1/1) |
| fichamba:
Hi everybody. One of my T3A is damaged. The bad component is an IC which I cannot find. Maybe somebody here will know which one it is. I include a pic of the IC in question. It hasn’t ground plane in the back. Please help me if possible. I’m in a hurry. TIA! |
| BC547B:
After a quick search turns out it's a Power/Charger IC by On-Bright as one chinese site mentioned... Here's a buy link from AliBaba: https://www.alibaba.com/product-detail/OBGZ12CP-IC-electronic-components-Chip-In_1601351354406.html Also try to contact On-Bright: https://www.on-bright.com/en/index/ |
| Harry_22:
Hi! |
| fichamba:
Thanks a zillion to both!! The problem is also in the uP… |
| fichamba:
…and I don’t have the uCode to program the ARM uPc. The board has the pins to program it from scratch, but I have only the firmware to be programmed thru the USB C port 8-( |
| Navigation |
| Message Index |