| Electronics > Repair |
| Amiga 600 ... maybe Gayle problem ... |
| << < (3/3) |
| saronno:
--- Quote from: m k on May 14, 2024, 12:47:06 pm ---85 ohms is quite low. I remember that some PCB versions had ground plane problems, it was not positioned correctly, means that some holes may be contacting it, it's also pretty nasty problem if a trace of questionable hole has a wrong destination. Then only solution is to cut the hole away from the trace and reroute, possibly through the same hole, maybe after drilling some extra space. --- End quote --- That's something I was thinking too .... because, with the thermal camera, I often see ground connection a bit hotter than the rest of the board. --- Quote ---Can the screen be light gray instead of white? --- End quote --- maybe |
| Navigation |
| Message Index |
| Previous page |