Anyone Identify This Connector?

[The Doktor]

Can anyone tell me what this connector is? And if it is no longer available, is there a good substitute? A friend was reinstalling this board after I repaired it, and snapped the connector. I have a feeling CA glue would probably not be sufficiently strong.

It is an 11 pin connector, .100( or very close) pitch for one of those flexible flat plastic cables. I believe it is the connector for a small keyboard.The board has a 1979 production date on it. The connector is marked Molex on one end and 4850 on the other. I thought it would be very obvious to find, but I have not found any pictures or references to a connector like this. Even if it is completely obsolete, I would expect at least a few pictures. Somebody please tell me what I'm missing?

Thanks
Ed

[amyk]

Unfortunately the state of search engines these days means only the newest and most popular things can be found easily.

If it says Molex, you could try asking them.

Nonetheless a 0.1" pitch 11-position FFC connector is not exactly a rare part.

[T3sl4co1l]

No other identifying marks on it? What fits into it?

Tim

[tooki]

Here’s the drawing, most likely: https://tools.molex.com/pdm_docs/sd/015254241_sd.pdf

If it’s the right series, then you’re after part number A-4850-11, aka 15-25-4111, which is discontinued:

https://www.molex.com/en-us/products/part-detail/15254111

https://www.digikey.ch/en/products/detail/molex/0015254111/52198
https://www.mouser.com/ProductDetail/Molex/15-25-4111