EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: AkibUddin on November 13, 2022, 11:17:22 am

Title: Baku 858A smd hot soldaring station problem
Post by: AkibUddin on November 13, 2022, 11:17:22 am

Tempareture LED on all time & tempareture adjustment knob not working but both potentiometer still good condition and abnormal exciting heat,Air flow system still good condition,moc3041 & triac still good condition, moc switching 3.6v Ziner change but still over heat