Electronics > Repair
BM235 DC screen (mostly) blank
(1/1)
jstuart:
Fired up my eevblog bm235 the other day and found the dc screen was missing all the numbers. Batteries are ok. (I changed them just because I know you'll ask. No leakage to report.)

[ Attachment Invalid Or Does Not Exist ]

The volts ac screen looks normal. Cycling through the DC ranges I see blank (auto), blank, -55.03, -550.3, 0L. mV dc appears to work normally, but I don't have a mV reference handy to confirm it's accurate. The rotary switch seems fine mechanically. Again, batteries OK. Innards look clean.

Any suggestions how to trouble shoot?

Much thanks,
Jeff
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod