Broken connector on U-TEC UL1 Lock

[billchurch]

This is some kind of connector, not exactly flex but close to that kind. It goes on https://support.u-tec.com/hc/en-us/categories/360000196171-ULTRALOQ-UL1-Combo, snapped off when I was trying to remove it. I can't for the life of me tell what it is... Any thoughts?

- Surface mount
- Seems like 0.050" / 1.27mm pitch
- 12 positions, single row













https://imgur.com/a/FtRVEMB

[MarkT]

Should be able to reflow it straight back on as no pads have lifted...

[billchurch]

The metal pins all broke from the connector. They’re still on the board unfortunately.

[billchurch]

The closest I've found so far is here, but the pitch is wrong and the connector mating pins aren't right...

https://www.digikey.com/en/products/detail/jst-sales-america-inc/SM12B-PASS-TBT/2771906?0=%2Fheaders-male-pins&s=N4IgjCBcoLQKxVAYygMwIYBsDOBTANCAPZQDaIATCALoC%2BthVk5AygLJgUBCMACgIIsWNWkA

I've been trying to fiddle with my search and looking at related data-sheets but keep coming up short.

I do have a Support case in with U-Tec and they're looking to see if they have spare boards available but I also asked them to reach out to engineering to see if they can just tell me what connector that is... Fingers crossed, I'm sure it's an odd request for them.

[tooki]

This is some kind of connector, not exactly flex but close to that kind. It goes on https://support.u-tec.com/hc/en-us/categories/360000196171-ULTRALOQ-UL1-Combo, snapped off when I was trying to remove it. I can't for the life of me tell what it is... Any thoughts?

- Surface mount
- Seems like 0.050" / 1.27mm pitch
- 12 positions, single row

Could it be 1.25mm pitch? It sure looks like it could be JST GH:
Product page: https://www.jst-mfg.com/product/index.php?series=105
Datasheet: https://www.jst-mfg.com/product/pdf/eng/eGH.pdf?6614377b956cc