Electronics > Repair
Brüel & Kjær 2801 Microphone Power Supply Schematics
(1/1)
Smoky:
I'm hoping that someone might have a copy of the Brüel & Kjær 2801 Microphone Power Supply schematics.

I put together the 2801 microphone power supply, the 2615 cathode follower microphone pre-amplifier, and the 4134 microphone for a test.

I'm measuring 14.5v of DC after the internal 4uF blocking capacitor at the direct output. I measure 62v of DC before the blocking capacitor (signal path from the microphone).

When I speak from a distance into the microphone, I do get between 0-10mV of AC at the output.

timop:
I have a service manual for the B&K 2803 two channel power supply, dated from 1967. The circuit might be quite similar to the 2801 (block diagram attached).
If you're still interested, I can scan it and make it available after returning from my summer holidays in a couple of weeks.
BR, Timo
Smoky:
Thank you very much :-+ The 2803 is also "tube" driven so it should be very similar to the 2801. No hurry either, I won't be digging into any electronics-related stuff for a few more months.
timop:
Here's the B&K 2803 Two Channel Power Supply service manual + schematic. Enjoy!
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod