EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: dorkshoei on April 21, 2021, 08:01:26 pm

Title: Can anyone ID this binding post knob?
Post by: dorkshoei on April 21, 2021, 08:01:26 pm
Used on a Kikusui Electronics PLZ72W Load tester. (https://cdn.wotol.com/DfGx4cyA6ZCpCs2luZmHw9ya4js=/fit-in/1000x1000/media/pictures/0b6/0b6ccc82-7bb0-451a-80bc-43f14b3c3fcd.jpg).  I'm looking for the cream colored one (missing on my unit).

It's not any Pomona I could find.    It's not a Greyhill 29,  though that is closest.

Worst case I'll have to replace with a different brand.


Title: Re: Can anyone ID this binding post knob?
Post by: eevcandies on April 27, 2021, 05:23:26 am
maybe take a look here for some ideas

https://www.eevblog.com/forum/testgear/where-can-i-buy-these-type-of-female-banana-ports-(kikusui-dc-electronic-load)/ (https://www.eevblog.com/forum/testgear/where-can-i-buy-these-type-of-female-banana-ports-(kikusui-dc-electronic-load)/)
Title: Re: Can anyone ID this binding post knob?
Post by: dorkshoei on April 27, 2021, 02:38:02 pm
Quote from: eevcandies on April 27, 2021, 05:23:26 am
maybe take a look here for some ideas

https://www.eevblog.com/forum/testgear/where-can-i-buy-these-type-of-female-banana-ports-(kikusui-dc-electronic-load)/ (https://www.eevblog.com/forum/testgear/where-can-i-buy-these-type-of-female-banana-ports-(kikusui-dc-electronic-load)/)

Thank you.  I searched before I posted but missed this.
Title: Re: Can anyone ID this binding post knob?
Post by: fcb on April 27, 2021, 03:45:48 pm
These look like SATO parts.

http://www.satoparts.co.jp/JPN/item/T/list.php (http://www.satoparts.co.jp/JPN/item/T/list.php)
Title: Re: Can anyone ID this binding post knob?
Post by: dorkshoei on April 27, 2021, 04:12:30 pm
Quote from: fcb on April 27, 2021, 03:45:48 pm
These look like SATO parts.

http://www.satoparts.co.jp/JPN/item/T/list.php (http://www.satoparts.co.jp/JPN/item/T/list.php)

It's close to a couple but not exact (to my eye).    The metal portion that is inside the case looks like T-1.  They have the reduction in diameter than the flat end (no thread).

I emailed Kikusui Japan.  Maybe they will tell me.  Maybe :D