Electronics > Repair

Can someone help identify these caps?

(1/8) > >>

phlegeton:
I tried to find info about these caps, but I couldn't find any info. I looked for "47 C5N" Which didn't give any result, and I look for "S7 JQ" and "S7 IQ". I could find that "S7" could be 47uF?
What for packages are these caps? Are these Tantaal-polymeer caps?

Hope that someone can help me

Grandchuck:
My guess is tantalum

phlegeton:
thanks!. Do you know how I can read what values they are? and do you know what package these caps are?

coromonadalix:
yes tantalums

47 would or could be 47 uf, i do think 47 uf        but some web pages say 4.7 uf  used with multipliers ????   for voltages measure between the pins    ex : 12vdc   would be a 16vdc    etc ...

the other ...  searching



would be  from here :  http://www.iequalscdvdt.com/Markings_and_Codes.html


47 uf  indeed
S =4.7 
7  is the multiplier    10 exp7 

see following answer for more

fzabkar:
Not sure if this is the correct datasheet, but the manufacturer looks like Panasonic:

https://docs.rs-online.com/cd03/0900766b8124ab01.pdf
https://industrial.panasonic.com/cdbs/www-data/pdf/AAA8000/AAA8000COL106.pdf

"S7" is 47uF. If that's a "j" rather than an "l", then the voltage is 6.3V.

 Conductive Polymer Tantalum Solid Capacitors
 Surface Mount Type
 TPE series B size

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod