| Electronics > Repair |
| Coupler on old Hameg scope |
| << < (3/3) |
| p2potter:
Thanks everyone for the responses. I will contact various folks as the second picture in the last post is exactly what i need. The Amazon coupler i bought works, but it is big and looks really ugly (bright metallic blue!). Thanks, Phil |
| oz2cpu:
sorry to kick alive old thread, but i just solved the same problem , same broken nylon part, same Hameg brand I 3D designed and 3D printed the part, works perfectly fine, I also shared the file for free on thingiverse https://www.thingiverse.com/thing:6894218 |
| cte:
Maybe I can add to this... I needed replacement for the red plastic part used on the vertical amplifier board for the "5x magnification". My solution has to be printed in two halfs (one has to be mirrored) and then glued together. |
| oz2cpu:
CTE thanks for sharing did you also put the files free available on thingiverse or similar ? |
| cte:
No, not yet. Never made an account there. Maybe I should... :clap: |
| Navigation |
| Message Index |
| Previous page |