Author Topic: Dead Philips oscilloscope PM3055  (Read 6871 times)

0 Members and 1 Guest are viewing this topic.

Offline Geekfix1706

  • Contributor
  • Posts: 5
Re: Dead Philips oscilloscope PM3055
« Reply #25 on: May 07, 2017, 09:25:53 pm »
Yes it must for the fitted 2x1R (0.5R) resistors, but I had changed them for a 10R resistor so current needed would be less around 150mA...
 

Offline oldway

  • Super Contributor
  • ***
  • !
  • Posts: 2174
Re: Dead Philips oscilloscope PM3055
« Reply #26 on: May 08, 2017, 02:17:59 am »
Yes it must for the fitted 2x1R (0.5R) resistors, but I had changed them for a 10R resistor so current needed would be less around 150mA...
It's very funny that you provide this information only now ..... :-DD
For your first posts, you already demonstrate that you are in bad faith ... it's not really a good start.  |O
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf