Looking for a source for these parts

[HardCoreElectronics]

I am lost for time looking for a source on this power cord grommet.

Anyone familiar with this type? The slot slides on to a metal frame in a clothes dryer.

Grommet measures
OD 35mm
ID 16mm
smaller OD 26.5mm
Slot OD 20mm
Material: Similar to the wire jacket PVC insulation.

https://drive.google.com/open?id=1CPGK46uozUO8wAZG4sYJA8szLcSsY2_J

And also this type of connector with unusual dimensions.  8mm x 16mm

https://drive.google.com/open?id=1ASZv7Paj5gLdePFBOWFgMJYqPhNoTZjV

https://drive.google.com/open?id=1u2JoGCIbQI3WYcIJ14pR9nJrMbF2Ji6v

[EPTech]

HI there,

For the gromet, try this: http://www.essentracomponents.com/en-ca/

For the tab, maybe this: https://benl.rs-online.com/web/c/connectors/terminals-splices/crimp-tab-terminals/?applied-dimensions=4294692956

[HardCoreElectronics]

Thanks for the input! 

I ended up making an extension cord with an electrical box, dryer outlet and another dryer cable. The cost and time to wait for the parts required was insurmountable to just making up an extension cable.  Local electrical code rules allow for it.