| Electronics > Repair |
| Dell XPS 15 motherboard sudden death, no clear sign |
| (1/3) > >> |
| Orsu:
Hello, This is my first message on this board. My 4-5ish years old dell xps 15 (laptop) suddenly died the other day. Irrelevant, but i opened a pdf file and it very suddenly stopped with no warnings or nothing. I couldn't get it to boot again, so i tried unplugging the battery and the cmos and doing it again. To no avail. The diagnostic LEDs (link, if it's useful to you: https://www.dell.com/support/kbdoc/en-us/000141206/a-reference-guide-to-the-xps-notebook-diagnostic-indicators) just stay white before stopping. Removing the RAM did got me the amber code indicating a memory problem, but plugging it back in didn't fix anything. Plugged screens don't display anything, or detect a video signal. I then stripped the motherboard of everything i could, and i see no obvious defect or problem. I plugged it in and tried booting to see if there was an element getting particularly hot, and nothing. The only thing i guess, is that when i removed some black tape there were bit of solder sticking to it, but they were just "there" not really soldered to an element. What should i try? Am i cooked? Is providing pictures any help? Thanks for suggestions, this (was) my daily driver, and i can't really afford a new one right now. |
| indeterminate:
Please list the exact model |
| Orsu:
It's a xps 15 7590 https://dl.dell.com/topicspdf/xps-15-7590-laptop_users-guide_en-us.pdf I managed to find the same board, but this one has a different CPU on it. https://www.parts-people.com/index.php?action=item&id=31529 I can't tell for certain whether the cpu or some small component on the board has given up on life |
| indeterminate:
At a minimum you will need a multimeter , oscilloscope & fine probes. you will need to get a copy of the schematics for your particular pcb unless you have a lot of spare time. This is a very very complex and difficult thing to repair, the fact that it does sumthing when you press the power button gives you a place to start. it could just be a simple fault in one of the power supplies if you have a static safe work place and a 10x > 20x magnifier you could go looking for dry / cracked solder joints you could be lucky. |
| Orsu:
Do you know of a repo where i could find schematics? And so you would check each component one by one then ? Yeah, time consuming, but let's say it's for reuse reduce recycle :( |
| Navigation |
| Message Index |
| Next page |