Electronics > Repair
Digital loop tester repair
(1/1)
fant:
I have a Kyoritsu 4120 Digital PSC-Loop tester that suddenly stopped working.
It is used to measure the Ground resistance for an electrical system.
Pictures annexed.
It was working well, but suddenly it stopped and now during measurement shows 1 and nothing else.
The three neon bulbs are working fine and the measurement timings are good.
Anybody has the schematic diagram?
Of course already tested semiconductors, diodes, resistors, fuses.
Thank you
fant:
I have seen that the ROBIN KMP4120 is the same instrument.
Any schematic about this ROBIN?
Thank you in advance
Navigation
[0] Message Index
Go to full version