DUPLO 4X-8009 ic replace ideas

[kratmel]

Hi, on Duplo post printing machine one of bipolar stepper driver IC  DUPLO 4X-8009 burned.



For long time i try to find this IC or complete board DUPLO UNIT 98H-8013. No success

DUPLO 4X-8009 used for control 2A per phase stepper motor.
It has 4 inputs, 4otputs (two H bridges), power supply +24V, GND and two 0.2 OHM current chopper resistor.

Please help to find this IC, or any information about it control inputs, manuals ect.

P.S. Now i try to replace this IC by L297+L298 curent chopper with 4 (ABCD) phase input.