Electronics > Repair
Agilent E4421B RF generator restoration project
<< < (9/9)
imaurente:
Hey guys!
I'm having problems with my 4421B, it simply doesn't activate the modulation, I hear the sound from the relay, but it doesn't work. It's like trying to activate modulation, but it doesn't, I've already done some tests:
1) I used the external modulation input and it worked well;
2) The OCXO is in order, 10mhz perfect and signal without imperfections.
One detail, about a year ago, my time base stopped working and I replaced it with the same one (ebay) and everything went back to normal, I don't have the service manual, if someone could make it available it would be of great help.
Note: The signal in blue and the attempt to modulate in FM (dev=100khz)

Hug!
e120guru:
@nctnico, do you by any chance still have your design laying around for the display interface? Or any details on the pinout of the original display cable? I need to perform a similar operation, and managed to come accross the same display you used.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod