Author Topic: Feeltech FY3200s Repair  (Read 510 times)

0 Members and 1 Guest are viewing this topic.

Offline Unordung

  • Contributor
  • Posts: 46
  • Country: au
Feeltech FY3200s Repair
« on: February 07, 2020, 11:05:24 am »
Hey guys,
Quite a while back I kinda maybe sorta connected my cheap Chinese fun gen (Feeltech FY3200s) directly to 30V DC.
Needless to say the fun gen was not impressed. Quite surprisingly the only damage was to the Chanel in question.
It still generates the desired frequency and signal but the amplitude is at best 10mV.

Thus I suspect the output amplifier for the channel 1 is damaged. Does anyone have a schematic for this unit before I go digging about?
I have been Googling for about an hour and cant find one so you guys are my last hope.

Regards
 

Offline goaty

  • Regular Contributor
  • *
  • Posts: 129
  • Country: de
Re: Feeltech FY3200s Repair
« Reply #1 on: February 07, 2020, 11:53:33 am »
 
The following users thanked this post: Unordung

Offline Unordung

  • Contributor
  • Posts: 46
  • Country: au
Re: Feeltech FY3200s Repair
« Reply #2 on: February 07, 2020, 11:58:26 am »
Not quite the same unit I'm afraid.
That unit is USB input while mine is mains input.
The PCB is entirely different.
 
The following users thanked this post: WattsThat

Offline goaty

  • Regular Contributor
  • *
  • Posts: 129
  • Country: de
Re: Feeltech FY3200s Repair
« Reply #3 on: February 07, 2020, 11:04:58 pm »
Ah ok, didn´t read its another model...

Here´s a picture of yours
https://chinese-electronics-products-tested.blogspot.com/p/fy3200s-function-generator-tested.html

Guess it´s the chip under the heatsink then. Maby you can replace  it.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf