Fender Champion 100 guitar amp (component identification etc)

[cowasaki]

Just borrowed a Fender Champion 100 guitar amp which worked at his house as he was showing me the best settings.  On arrival at my house I plugged it in and there was an almighty crack and a flash and it took out the electrics.   

I've restored everything and now looking at the amp.  The bridge rectifier is blown which is a GBU806 and I've ordered a few to collect tomorrow morning from CPC.  After that there are two components which have basically vaporised these are the capacitors C358 & C356.  C357 & C359 appear to have survived.

As yet I've not managed to find a service manual.

Anybody have a schematic for it or know where I can get one?

[cowasaki]

I've found that the power module is the same across several models....

C356-C359 are SMD caps

They are shown as

C357
.015
630V

What value is that?  I can't find that value or voltage rating.  Am I reading it all wrong?

PDF of schematic for the board is attached and the components are in the top left of page 2.

[coromonadalix]

0.015 uf    or 15 nanofarads at 630 volts

something like theeses

https://www.mouser.com/Passive-Components/Capacitors/Ceramic-Capacitors/MLCCs-Multilayer-Ceramic-Capacitors/Multilayer-Ceramic-Capacitors-MLCC-SMD-SMT/_/N-bkrdv?P=1z0wps5Z1yp7zipZ1yzmotuZ1yx6r6b

https://www.mouser.com/Search/Refine?Keyword=GRM31CR72J153KW03L&FS=True

[Shock]

From the schematic the unlabelled caps appear to be in uF so .015uF or 15nF fits.