| Electronics > Repair |
| Fluke 179 problem measuring resistance |
| << < (4/4) |
| Harry_22:
Hi! I have following differences: Ω - 2,64VDC ))) - 7,32VDC Diode - 7,32VDC mA - 2Ω A - 0,3Ω |
| neskor:
Thanks! I double-checked my working 87V and I'm getting similar results: Ω - 2,76 VDC ))) - 7,345 VDC Diode - 7,336 VDC |
| m k:
Top left corner of the chip is not promising. |
| CharlieD:
I had a smilar issue with a Fluke 179, and a clean of the rotary selector with IPA solved the problem, some particle of dust or something else could be the problem. Also, in other models when I have something bad with specific measurement function, sometimes broken tracks/vias because of battery corrotion was the problem, check for these. |
| Navigation |
| Message Index |
| Previous page |