| Electronics > Repair |
| Fluke 23 with blown R1 (fusible 1K, 2W) and R2 (1M, 1W 5%) |
| (1/1) |
| Caladan:
I have a Fluke 23 with blown R1 and R2 resistors. Both measures OL. Everything else seems fine. Need help finding replacement part numbers. R1 is a fusible 1K, 2W and R2 is a 1M, 1W 5% resistor. Thanks! |
| Paceguy:
These parts are no longer available thru Fluke. Best to purchase a parted out 23, 73, 75 or 77 and harvest the parts there. |
| coromonadalix:
there was some talk there https://www.eevblog.com/forum/testgear/fluke-77-replacement-for-r1-(1k-2w-fusible-resistor)/ |
| Caladan:
Hi again, what do we think of using these components as replacement parts? Fuse: https://no.mouser.com/ProductDetail/576-KLKD020.T R1 - Wirewound Resistors - Through Hole 2W 1000 ohms 1%: https://no.mouser.com/ProductDetail/588-WHC1K0FET R2 - Thick Film Resistors - Through Hole 1M ohm 5% 1W High Voltage: https://no.mouser.com/ProductDetail/756-VRW68-1M0JI |
| Navigation |
| Message Index |