Author Topic: Fluke 23 with blown R1 (fusible 1K, 2W) and R2 (1M, 1W 5%)  (Read 648 times)

0 Members and 1 Guest are viewing this topic.

Offline CaladanTopic starter

  • Newbie
  • Posts: 2
  • Country: no
Fluke 23 with blown R1 (fusible 1K, 2W) and R2 (1M, 1W 5%)
« on: July 25, 2024, 06:32:40 pm »
I have a Fluke 23 with blown R1 and R2 resistors. Both measures OL. Everything else seems fine.

Need help finding replacement part numbers.
R1 is a fusible 1K, 2W and R2 is a 1M, 1W 5% resistor.

Thanks!
« Last Edit: July 25, 2024, 08:11:52 pm by Caladan »
 

Offline Paceguy

  • Regular Contributor
  • *
  • Posts: 207
  • Country: ca
Re: Fluke 23 with blown R1 (fusible 1K, 2W) and R2 (1M, 1W 5%)
« Reply #1 on: July 25, 2024, 09:33:21 pm »
These parts are no longer available thru Fluke. Best to purchase a parted out 23, 73, 75 or 77 and harvest the parts there.
 

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 6998
  • Country: ca
 
The following users thanked this post: Excavatoree

Offline CaladanTopic starter

  • Newbie
  • Posts: 2
  • Country: no
Re: Fluke 23 with blown R1 (fusible 1K, 2W) and R2 (1M, 1W 5%)
« Reply #3 on: October 15, 2024, 11:57:04 am »
Hi again, what do we think of using these components as replacement parts?

Fuse:
https://no.mouser.com/ProductDetail/576-KLKD020.T

R1 - Wirewound Resistors - Through Hole 2W 1000 ohms 1%:
https://no.mouser.com/ProductDetail/588-WHC1K0FET

R2 - Thick Film Resistors - Through Hole 1M ohm 5% 1W High Voltage:
https://no.mouser.com/ProductDetail/756-VRW68-1M0JI
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf