EEVblog Electronics Community Forum
Electronics => Repair => Topic started by: lzcubchgg on January 19, 2025, 12:25:21 pm
-
I have a FLUKE 287 that prompts for calibration when it is turned on. I don't have an official warranty, I want to know if there is a problem with the data in the flash memory. I want to use data from another good machine to refresh it. Can I handle it this way? thank you.
calibration data invalid,calibrate meter before use.see service manual.
-
287 cal jpg
-
maybe some pointers here
https://www.eevblog.com/forum/repair/fluke-289-woes/msg1892444/#msg1892444 (https://www.eevblog.com/forum/repair/fluke-289-woes/msg1892444/#msg1892444)
-
Thank you, I am already watching. ;D