EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: subeesh on January 16, 2017, 01:10:32 pm

Title: fluke 287 dmm
Post by: subeesh on January 16, 2017, 01:10:32 pm

hi all     i have fluke 287 dmm .now not measurring Vlotages & current. showing on disply "lead connect correctly".can u helpme repairng this

Title: Re: fluke 287 dmm
Post by: mzacharias on January 16, 2017, 01:59:12 pm

Has the meter been exposed to moisture or other contaminants? If the current jack sensing is triggered it will cause this symptom.