Electronics > Repair
Fluke 289 not quite sorted.
frenky:
Tadaaaa:
--- Code: ---RedBoot> ^C
RedBoot> help
Manage aliases kept in FLASH memory
alias name [value]
Set/Query the system console baud rate
baudrate [-b <rate>]
Manage machine caches
cache [ON | OFF]
Display/switch console channel
channel [<channel number>]
Compute a 32bit checksum [POSIX algorithm] for a range of memory
cksum -b <location> -l <length>
Test clock accuracy
clock
Display (hex dump) a range of memory
dump -b <location> [-l <length>] [-s] [-1|-2|-4]
Execute an image - with MMU off
exec [-w timeout] [-b <load addr> [-l <length>]]
[-r <ramdisk addr> [-s <ramdisk length>]]
[-c "kernel command line"] [-t <target> ] [<entry_point>]
Manage FLASH images
fis {cmds}
Manage configuration kept in FLASH memory
fconfig [-i] [-l] [-n] [-f] [-d] | [-d] nickname [value]
Manage Filesystem files
fs {cmds}
Execute code at a location
go [-w <timeout>] [-c] [-n] [entry]
Help about help?
help [<topic>]
Display command history
history
Set/change IP addresses
ip_address [-b] [-l <local_ip_address>[/<mask_len>]] [-h <server_address>] [-d <dns_server_address]
Load a file
load [-r] [-v] [-d] [-h <host>] [-p <TCP port>][-m <varies>] [-c <channel_number>]
[-b <base_address>] <file_name>
Compare two blocks of memory
mcmp -s <location> -d <location> -l <length> [-1|-2|-4]
Copy memory from one address to another
mcopy -s <location> -d <location> -l <length> [-1|-2|-4]
Fill a block of memory with a pattern
mfill -b <location> -l <length> -p <pattern> [-1|-2|-4]
Network connectivity test
ping [-v] [-n <count>] [-l <length>] [-t <timeout>] [-r <rate>]
[-i <IP_addr>] -h <IP_addr>
Reset the system
reset
Display RedBoot version information
version
Display (hex dump) a range of memory
x -b <location> [-l <length>] [-s] [-1|-2|-4]
--- End code ---
Correct pinout:
purpose:
You're welcome Frenky.
Does Tadaaaa mean you've fixed her?
frenky:
--- Quote from: purpose on January 07, 2018, 04:10:31 pm ---You're welcome Frenky.
Does Tadaaaa mean you've fixed her?
--- End quote ---
No sadly not. But it is a progress. Next I'll try to load a data image from firmware update into flash memory.
Sent from my SM-N9005 using Tapatalk
purpose:
Good luck.
frenky:
Tnx. ;)
I'm digging trough debug console...
RedBoot> fconfig -l
--- Code: ---Run script at boot: false
Use BOOTP for network configuration: false
Gateway IP address: 0.0.0.0
Local IP address: 192.168.9.133
Local IP address mask: 255.255.0.0
Default server IP address: 192.168.100.100
Console baud rate: 115200
DNS server IP address: 0.0.0.0
Set eth0 network hardware address [MAC]: true
eth0 network hardware address [MAC]: 0x00:0x80:0x40:0x00:0x22:0x85
GDB connection port: 9000
Force console for special debug messages: false
Network debug at boot time: false
--- End code ---
RedBoot>fis list
--- Code: ---Name FLASH addr Mem addr Length Entry point
RedBoot 0x10000000 0x10000000 0x00040000 0x00000000
fs 0x10040000 0x00000000 0x007A0000 0xFFFFFFFF
FIS directory 0x107E0000 0x107E0000 0x0001F000 0x00000000
RedBoot config 0x107FF000 0x107FF000 0x00001000 0x00000000
--- End code ---
RedBoot>fs info
--- Code: ---Filesystems available:
devfs
jffs2
Devices available:
/dev/flash/
--- End code ---
RedBoot>fs list
--- Code: ---fs: No filesystems mounted
--- End code ---
RedBoot> fs mount -d /dev/flash/ -t jffs2 /hmm1
--- Code: ---fs mount: mount(/dev/flash/,/hmm1,jffs2) failed 2
--- End code ---
RedBoot> fs mount -d /dev/flash/ -t devfs /hmm1
RedBoot> fs info
--- Code: ---Filesystems available:
devfs
jffs2
Devices available:
/dev/flash/
Mounted filesystems:
Device Filesystem Mounted on
/dev/flash/ devfs /hmm1
--- End code ---
RedBoot> fs list
--- Code: ---fs list: no such directory /
--- End code ---
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version