| Electronics > Repair |
| Fluke 73 III repair |
| << < (4/4) |
| marcovanyken:
--- Quote from: mqsaharan on November 12, 2024, 03:52:39 am --- --- Quote from: marcovanyken on November 11, 2024, 10:03:31 am --- Can you perhaps tell me what Transistor is the one marked in my attached pic. Its the pic of your board but I have the exact same board. --- End quote --- I don't have the service manual or schematic for this particular meter. But my guess is the encircled transistor will be 2N3904, exactly the same as the one next to it. Together these are used as a high speed clamp. Please be careful while taking my suggestion. I could be completely wrong. --- End quote --- Thank you for the reply, I also thought it would be a 2N3904 but wanted someone else's input as well. :-+ |
| bborisov567:
I can check in a few days if still needed but as far as i remember both transistors were the same. |
| marcovanyken:
--- Quote from: bborisov567 on November 13, 2024, 08:21:43 am ---I can check in a few days if still needed but as far as i remember both transistors were the same. --- End quote --- It was indeed a 2N3904 as well. Fluke like new again. |
| Navigation |
| Message Index |
| Previous page |