EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: longboard1210 on November 01, 2020, 01:12:40 pm

Title: Fluke 789 not starting up
Post by: longboard1210 on November 01, 2020, 01:12:40 pm

Hi guys i have a Fluke 789 that will not turn on,i have looked at the two forum posts here but mine is diferent,

The meter draws no current when turned on so looks like i have a power rail down,however i am sruggling without a schematic or block diagram  board is good with no damage or delamination to it

Does anyone have any board info for this meter seems a shame to scrap it

Title: Re: Fluke 789 not starting up
Post by: smaultre on November 01, 2020, 04:21:33 pm

Check battery, check IC power rails, check flash\generator, activity when button is turned.