Author Topic: Fluke 87V case front replacement  (Read 160 times)

0 Members and 1 Guest are viewing this topic.

Offline panamaszr12

  • Newbie
  • Posts: 3
  • Country: us
Fluke 87V case front replacement
« on: December 17, 2019, 05:33:56 am »
I have a fluke 87V with the lettering gone on the front case. I ordered a new case front, but need to know how to remove the rotary dial to put on the new case. Any help would be appreciated.
Thank you in advance 
 

Offline Black Phoenix

  • Frequent Contributor
  • **
  • Posts: 518
  • Country: hk
Re: Fluke 87V case front replacement
« Reply #1 on: December 17, 2019, 10:09:26 am »
You can use the service manual for instructions:

http://doc.xdevs.com/doc/Fluke/87V/Fluke_87V_Multimeter_Service_Manual-Fluke87servicemanual.pdf

For what I see is the same kind as most of the Flukes, so you need to take out pressing the centre pin (credits to Mr. ModemHead - Shown on a 170 Series)





 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf