Author Topic: Fluke D804/8024b Touch-Hold switch  (Read 376 times)

0 Members and 1 Guest are viewing this topic.

Offline ogdento

  • Regular Contributor
  • *
  • Posts: 99
  • Country: us
Fluke D804/8024b Touch-Hold switch
« on: April 10, 2019, 12:28:50 am »
Hi,
I recently acquired a nice looking D804 (I think it's the same as the 8024b) and upon cracking it open it seems the Touch Hold button is shattered. 

There was a piece rattling around inside, but the two bits together don't make up the full part.

The part number is 607333... has anybody got a spare kicking around?  I'd buy it or at least love to see some photos so I can try to fashion a replacement... it looks like there should be two "fingers" that fit around the actual pushbutton, but I don't know exactly what it's supposed to look like.

Thanks,
Tom
 

Offline GLouie

  • Contributor
  • Posts: 44
  • Country: us
Re: Fluke D804/8024b Touch-Hold switch
« Reply #1 on: April 10, 2019, 11:18:03 pm »
You mean the peak hold switch, right?
Give me a day to take mine apart and photograph the part.
 

Offline GLouie

  • Contributor
  • Posts: 44
  • Country: us
Re: Fluke D804/8024b Touch-Hold switch
« Reply #2 on: April 11, 2019, 12:11:02 am »
You seem to be missing some parts.
Some pics attached (2 batches):
 
The following users thanked this post: ogdento

Offline GLouie

  • Contributor
  • Posts: 44
  • Country: us
Re: Fluke D804/8024b Touch-Hold switch
« Reply #3 on: April 11, 2019, 12:12:25 am »
More pics:
 

Offline ogdento

  • Regular Contributor
  • *
  • Posts: 99
  • Country: us
Re: Fluke D804/8024b Touch-Hold switch
« Reply #4 on: April 11, 2019, 05:13:09 am »
Wow, GLouie thank you so much... it seems I am indeed missing quite a bit of it!  Those pictures are super helpful, half of mine is just gone. 

I'll take a crack at a 3d model and see what I can come up with.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf