Hello,
i have an Problem with the Fluke 99 Scopemeter. Whe i switch i on, i can her the buzzer, an on autoset the relais clicking. With an optical interface i get the screen shot from the scope. I dont know how i could start. The Manual i found dosn't macht to my device.
I trid to do some messurment.
V1= 3,9V
V6 = 2,66V
V3 = 1,38V
V4 = -14,3V
V5 = -15,6V
V2 = -16,9V
I think this is okay?
When i chance the Contrast, the Voltages on the V1 - V6 are changing
Mario