Author Topic: Fluke was goo goned to death  (Read 598 times)

0 Members and 1 Guest are viewing this topic.

Offline cobalt232

  • Contributor
  • Posts: 11
  • Country: ca
Fluke was goo goned to death
« on: September 08, 2021, 06:44:55 pm »
i bought a secondhand t5-600 that has been over cleaned by someone.
now it feels a bit tacky and doesn't have a shine.
is there a product i can use that will give it that smooth plastic feel it should have?

thanks
 

Offline Paceguy

  • Regular Contributor
  • *
  • Posts: 51
  • Country: ca
Re: Fluke was goo goned to death
« Reply #1 on: September 25, 2021, 05:35:15 pm »
Hopefully, the Goo Gone didn't attack the surface of the plastic. I use Goo Gone from time to time and immediately follow it up with a Varsol wash down and I follow that with Zep's purple degreaser to get rid of the oily residue left behind by the Varsol. Besides that, there is not much that I can suggest.
 

Offline coromonadalix

  • Super Contributor
  • ***
  • Posts: 3440
  • Country: ca
Re: Fluke was goo goned to death
« Reply #2 on: September 26, 2021, 02:35:23 am »
with iso propyl acohol ?? does the goo     go ?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf