EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: watchaphong on May 28, 2023, 08:08:03 am

Title: Fluke187 ohm meter function unstable.
Post by: watchaphong on May 28, 2023, 08:08:03 am

Hi everyone
         my fluke 187 has a problem in ohm meter function. It is unstable example if I mesure resistor 10Kohm 1% but it's running around 8K to 11K. Any suggestion for this problem.

thank you

Title: Re: Fluke187 ohm meter function unstable.
Post by: Ugur on June 12, 2023, 01:56:28 pm

Have you checked your varistors?