Electronics > Repair
Fridge Lights
(1/1)
Turbochardged:
So I have a bunch of Jen-air fridges with these single LED pucks (W10843339) they are just a single 3030 SMD chip, nothing else. The knock-off ones from amazon work, but don't last. So i figured that i could just solder on new leds that are more in spec, and cheaper in bulk.  I don't know the voltage or mA for the circuit (still trying to figure that out). I do know the old ones have a Forward Voltage of 2.5v and the amazon ones have 5v. The base (solder pads) appears to be of a 1W model. They are wired in series with others in a Christmas light effect. I'm not as smart as a lot of you on here, but I would appreciate any help or insight. Or how i could test them out of circuit to find those values.


Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod