Hantek dso 5102p LCD adapter

[jasonmrc]

Hi

Looking to repair the fault in my hantek dso 5102p the display is not right - I contacted hantek and suggested to change the display panel to at070tn92 but i am suspecting the LCD adapter that sits behind the LCD glued with silicone is at fault as it supplies voltages to the LCD.

Has anyone tried to reverse engineer this board and have a schematic seems it uses a tps65150 chip. I am might be tempted to change the chip ! but first i want to confirm the schematic. the datasheet has various schematics .

Any help is greatly appreciated