Electronics > Repair
Help, identify chip D05A SOT23-6
(1/2) > >>
daisizhou:
Hallo everyone

This is a NEC LCD monitor.After it lights up, it always rolls up and down, it looks like the voltage is unstable.So I tried to replace the capacitor, but I didn't know the specific specifications of the SMD capacitor, so I disassembled the SMD capacitor.The dimensions of the capacitor are 1.6mm x 1.6mm x 3.2mm。
I don't know the withstand voltage and capacity of the chip capacitor,A friend suggested that I look for the surrounding circuit components. I took a picture and found a chip with a SOT23-6 package and the code is D05A.
It looks like a DCDC voltage conversion circuit.
If you know the exact model, please tell me, thanks.
fzabkar:
Qxxx are transistors.

daisizhou:

--- Quote from: fzabkar on September 17, 2024, 07:57:43 am ---Qxxx are transistors.

--- End quote ---
Is it a P-channel MOS tube?
fzabkar:
Examine the datasheet for the PWM controller IC.
daisizhou:

--- Quote from: fzabkar on September 17, 2024, 08:40:38 am ---Examine the datasheet for the PWM controller IC.

--- End quote ---
It seems that the PWM chip should be this one

I found the manual for this monitor, but there is no schematic diagram available
Navigation
Message Index
Next page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod