« previous next »
Pages: [1]   Go Down

Author Topic: Fluke 23 with blown R1 (fusible 1K, 2W) and R2 (1M, 1W 5%)  (Read 372 times)

0 Members and 1 Guest are viewing this topic.

Offline CaladanTopic starter

  • Newbie
  • Posts: 1
  • Country: no
Fluke 23 with blown R1 (fusible 1K, 2W) and R2 (1M, 1W 5%)
« on: July 25, 2024, 06:32:40 pm »
I have a Fluke 23 with blown R1 and R2 resistors. Both measures OL. Everything else seems fine.

Need help finding replacement part numbers.
R1 is a fusible 1K, 2W and R2 is a 1M, 1W 5% resistor.

Thanks!
« Last Edit: July 25, 2024, 08:11:52 pm by Caladan »
Logged
 

Offline Paceguy

  • Regular Contributor
  • *
  • Posts: 195
  • Country: ca
Re: Fluke 23 with blown R1 (fusible 1K, 2W) and R2 (1M, 1W 5%)
« Reply #1 on: July 25, 2024, 09:33:21 pm »
These parts are no longer available thru Fluke. Best to purchase a parted out 23, 73, 75 or 77 and harvest the parts there.
Logged
 

Online coromonadalix

  • Super Contributor
  • ***
  • Posts: 6559
  • Country: ca
Re: Fluke 23 with blown R1 (fusible 1K, 2W) and R2 (1M, 1W 5%)
« Reply #2 on: July 26, 2024, 12:51:44 am »
Logged
 
The following users thanked this post: Excavatoree
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee