Electronics > Repair
help laptop motherboard thomson NEO14A-4sl64
(1/1)
mabar:
Hello,
The motherboard has undergone a polarity inversion.
This short-circuited the 100µF tantalum.
After replacement, the A7SHB mosfet burned.
After replacement, everything works except the battery charge.

I made the partial diagram of the motherboard around the charging chip.

I took the voltages around the BQ735 chip, see photos.

I don't see anything abnormal on the voltages except ACDRV which is not boosted, I have 6.6v instead of ~18V normally?

I suspect a chip defect?

Here is my question:
but I also have a connection between Q1 and Q2 which goes to mosfets can they intervene in blocking the charge?

thank you
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod