Author Topic: Help me! E3632a error  (Read 671 times)

0 Members and 1 Guest are viewing this topic.

Offline qnhn90Topic starter

  • Contributor
  • Posts: 10
  • Country: vn
Help me! E3632a error
« on: December 02, 2019, 01:27:34 pm »
Dear all!
I have E3632a error:
1 PCB have Unreg , when power on , only CV display , don't have CC . Everything ok ( Not have error like 625 - I/O Communication Error)

- 2 PCB when power on have long beep . Beep ..beep in 2 second . Display won't work

- 1 PCB brokent input but we have any part in good condition to replace for Error PCB

Pls help me to repair and guide to me how to step by step check and fix it.
 

Offline LateLesley

  • Frequent Contributor
  • **
  • Posts: 322
  • Country: scotland
Re: Help me! E3632a error
« Reply #1 on: December 06, 2019, 02:13:20 am »
Hello. I think the first step is to get the service manual, and go through the troubleshooting steps.

http://literature.cdn.keysight.com/litweb/pdf/E3632-90010.pdf

page 65. ;) :)
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf