EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: MaximG on August 16, 2017, 08:10:55 pm

Title: Help needed: filter module for Ikea combioven MWC 6
Post by: MaximG on August 16, 2017, 08:10:55 pm

Hi all,

could someone help me to identify the part which blew up here (see attached image)? It is the same module as this one: http://www.europart.nl/c/onderdelen-koken/ikea/oven-magnetron/elektronica/ikea-condensator-480120100526-amw510-amw525-emccd6244-92750130 (http://www.europart.nl/c/onderdelen-koken/ikea/oven-magnetron/elektronica/ikea-condensator-480120100526-amw510-amw525-emccd6244-92750130)

TIA!

Title: Re: Help needed: filter module for Ikea combioven MWC 6
Post by: jmelson on August 16, 2017, 08:22:05 pm

2.2 uF 305 V, from the europart item.  Geez, 128 Euros for 5 Euros in parts?!?  That's crazy!

Get a 350 V or higher-rated one, if you can, 2.2 uF film capacitor, and you should be fine.

Jon

Title: Re: Help needed: filter module for Ikea combioven MWC 6
Post by: madires on August 16, 2017, 09:00:56 pm

Standard X2 filter cap with 2.2µF.

Title: Re: Help needed: filter module for Ikea combioven MWC 6
Post by: MaximG on August 17, 2017, 10:46:35 am

Thanks a lot everyone, much appreciated.