Electronics > Repair
Help needed to identify SOT23 component 418Q1
(1/1)
fripp:
Can anybody help me identify the component in the picture below.  SOT23 symbol 418Q1.  I believe it is a voltage regulator but it seems to have failed.  Not sure what the output voltage should have been.  Closest I have found is Fortune FS8854 but they don't list Q1 as a voltage option on the datasheet I can find. And it seems to be obsolete now.  Manufacture date was 2019.
fripp:
Reverse engineering has given me this schematic, but no clue to actual voltage from the 418Q1 regulator.  It is powering switched mode voltage sensing control circuitry from a 12V battery charger.

Any insights or strategy to progress gratefully welcome.

At the moment the output voltage from the regulator just tracks the input voltage up to 14v, I haven't taken it higher.  When the VAC is supplied to the Switched Mode PSU it constantly trips into over voltage mode and resets every few seconds or so.  I think this is from the 431 Zener detecting the over voltage in the control circuit supply and tripping the opto.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod