EEVblog Electronics Community Forum

Electronics => Repair => Topic started by: Aksol on May 13, 2015, 10:47:16 am

Title: Help needed to repair my Pure Tempus-1 digital radio receiver
Post by: Aksol on May 13, 2015, 10:47:16 am

Pure Tempus-1 blue dash board on. There was no display. The radio is not working.
Please help

Title: Re: Help needed to repair my Pure Tempus-1 digital radio receiver
Post by: g0uli on May 24, 2015, 10:48:30 pm

Quite a few of the Pure radios seem to develop high resistance on connectors linking internal circuit boards after a few years. Opening up the radio and unplugging and replugging in all the connectors can very often be successful in restoring the radio to life. There are some static sensitive components on the boards, so take the usual precautions to avoid damaging anything with static discharge. I have had considerable success restoring Pure radios to life with this method.